Services

Electrical and pneumatic tools

In short

Dion Peinture industrielle uses power and pneumatic tools, such as grinders and needle scalers, to remove loose mill scale, rust and paint from steel, and laitance or imperfections from concrete. It is the method of choice for hard-to-reach areas and maintenance work, at the Rouyn-Noranda shop or on site.

  • Grinders, needle scalers and other rotary tools
  • Standards: SSPC-SP 3, ISO 8501-1 St 2 or St 3
  • Removes weld flux and spatter, smooths rough welds
  • Can expose concrete aggregate for a decorative floor

Surface preparation using power or pneumatic tools is used on steel to remove all loose mill scale, loose rust, loose paint and other loose foreign matter. For concrete, it removes imperfections in the concrete and laitance, and exposes the concrete aggregate for a decorative floor. It is the ideal tool for hard-to-reach areas.

Among others, grinders, needle scalers and other rotary tools are used.

The most commonly used standards for power tool surface preparation are:

·        SSPC-SP 3

· ISO 8501-1, St 2 or St 3

Power tool cleaning is frequently used in maintenance operations. In addition to removing mill scale, rust and paint, this method can be used to remove weld flux and weld spatter, and to smooth rough welds before abrasive cleaning.

Frequently asked questions

When do you use power tools instead of blasting?

In hard-to-reach areas and for maintenance work, where loose rust, loose mill scale and loose paint need to come off. On welds, power tools also remove flux and spatter and smooth rough welds before abrasive cleaning.

Which standards apply?

The most common are SSPC-SP 3 and ISO 8501-1, grades St 2 or St 3. They set the level of cleaning expected on steel prepared with power tools.

Does this work on concrete?

Yes. On concrete, power tools remove imperfections and laitance. They can also expose the aggregate for a decorative floor. To plan your project, call 819 762-6005 or request a quote.

All services

· Reviewed by , Director, NACE Certified Coating Inspector Level 3