
Dion Peinture Industrielle Inc
City of Val-d'Or water tower
Surface preparation by 15,000 lb water jetting and application of a paint system
Dion Peinture industrielle prepares and paints the steel and concrete of tanks, water towers, structures and mining equipment: abrasive blasting or high-pressure water jetting, then epoxy, polyurethane or polyurea coatings. 6,000 sq. ft. shop in Rouyn-Noranda, crews on site from Abitibi to Nunavut.
Old paint and rust are blasted off. The surface is prepared and inspected to NACE standards before the first coat.
The paint system is sprayed in even coats, from base to top, then checked by our NACE Level 3 certified inspector.
City of Val-d'Or water tower: high-pressure water jet preparation and application of a complete paint system.
Efficient, long-lasting industrial painting solutions for every industry
Dion Peinture Industrielle has been in industrial painting since 1998. The company specializes in surface preparation by abrasive blasting (sand, glass and soda) and high-pressure water jetting. It also handles many other manual and mechanical surface preparation methods. Its other specialty is polyurethane and polyurea coatings, along with every type of epoxy-based industrial paint.
Our team has more than 20 years of experience. It takes on projects of every size in the industrial, commercial and mining sectors. Buildings, tanks, structures or equipment, in the shop or on site: we handle every type of job, wherever it is.




Four steps, from the rust survey to the final coat. It’s the method we used on the Val-d’Or water tower.
Before work starts, we record peeling, corrosion, and the condition of the legs and the bowl. The inspection is done by our NACE Level 3 certified inspector.
A 15,000 psi water jet strips old paint and rust. Depending on the substrate, we also use dry or steam abrasive blasting, or shot blasting.
Working from the boom lift, our painters apply each coat of the system: epoxy, polyurethane or polyurea, depending on how the structure is used.
The NACE Level 3 inspector checks every step, from surface prep to the final coat. The measuring instruments are calibrated every year.
According to our company records, Dion Peinture industrielle has worked in industrial painting since 1998. The 6,000 sq. ft. shop is at 1651, avenue Davy, in Rouyn-Noranda. Our RBQ licence number is 8278-6997-45. Our coating inspector holds NACE Level 3 certification.
Our job files list more than 50 tanks painted, of every size. At Deception Bay, in Nunavik, the crew painted five 4,000,000-litre petroleum tanks. Over 10 years, more than 5 covered bridges were repainted. One of them is the Levasseur Bridge in Authier-Nord: 129 feet long, built in 1928 and repainted in 2016.
The coatings we apply most often are 70 to 100% solids epoxy, polysiloxane, polyurethane and polyurea. High-pressure water jetting runs at 70 MPa and up. The work follows NACE, SSPC, ISO, ASTM and ANSI standards.
| Kirkland Lake | 81 km |
|---|---|
| La Sarre | 86 km |
| Amos | 109 km |
| Val-d’Or | 111 km |
| Ville-Marie | 132 km |
| Timmins | 222 km |
| Matagami | 268 km |
| Chibougamau | 519 km |

Surface preparation by 15,000 lb water jetting and application of a paint system

Effective solutions to protect and waterproof your tanks: mine tailings thickener

Corrosion and coating expertise
More details
Effective solutions to vacuum your residues: industrial vacuum

20,000 CFM capacity
More details

Sandblast and special coating on mining process parts.
More details

Epoxy kitchen floor coating with vinyl flakes
More details



35 tons crane
More details

Outdoor epoxy floor for a basketball court
More details
Sandblast and high-performance paint system for mining equipment
More details


Polyurea liner 100% Quebec product
More details

Polibrid 705 Penstock Lining
More details
Epoxy floor covering with 5000 ft² UV-resistant vinyl flakes.
More details
Two components polyurethane
More details

High-pressure water surface preparation and painting
More details
Concrete polyurethane lining - Oil retention pond
More details
Restoration of the chassis / platform and polishing of the cabin
More details
Complete painting restoration
More details
Protection of concrete against contamination of chemicals
More details




Surface preparation and painting
More details
Indoor pool of 80 feet by 42 feet
More details
General refreshment of areas affected by corrosion.
More details

Surface preparation, painting and lettering
More details

Sealing of wall and floor intersections
More details
At 1651, avenue Davy, Rouyn-Noranda, Quebec J9Y 0A8. Phone: 819 762-6005, Monday to Friday, 8 a.m. to 5 p.m.
Since 1998. The team has more than 20 years of experience in industrial, commercial or mining painting.
Abitibi-Témiscamingue, Nord-du-Québec, Northeastern Ontario and Nunavut. Kirkland Lake is 81 km from the shop, Timmins 222 km. See our service area.
Dion Peinture industrielle holds RBQ licence 8278-6997-45.
Yes, a NACE Certified Coating Inspector, Level 3, certificate 073877.
Epoxy, urethane, polyurethane, polyurea or conventional paints, after surface preparation by abrasive blasting, high-pressure water jetting or shot blasting.
· Reviewed by Marc-André Vaillant, P.Eng., Director, NACE Certified Coating Inspector Level 3